Beiträge: 172
Bewertung: 11
Registriert seit: Jun 2013
Status:
offline
|
RE: Fehlermeldung bei Debian Jessie 8.3
Erstmal sorry ist 8.4 das update hab ich erst gemacht...
Intel® Core™ i7 CPU 950@ 3.07GHz
2x HDD 750 GB SATA
3x RAM DDR3 8192 MB
root@Debian-84-jessie-64-minimal ~ # cat /proc/version
Linux version 3.16.0-4-amd64 ([email protected]) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 ([email protected]) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=a58ea0a0-26e5-4855-b558-8fcf94b7ba90 ro nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 0.5 present.
[ 0.000000] DMI: MSI MS-7522/MSI X58 Pro (MS-7522) , BIOS V8.14B8 11/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35f00000-0x36f77fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FA590 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000BF780000 00003C (v01 7522MT A7522800 20120925 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BF780200 000084 (v01 7522MT A7522800 20120925 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000BF780480 006E82 (v01 A7522 A7522800 00000800 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF78E000 000040
[ 0.000000] ACPI: APIC 0x00000000BF780390 0000AC (v01 7522MT A7522800 20120925 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BF780440 00003C (v01 7522MT OEMMCFG 20120925 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BF78E040 00007A (v01 7522MT A7522800 20120925 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BF78A480 000038 (v01 7522MT OEMHPET 20120925 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000BF790980 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88063fc00000 s80896 r8192 d21504 u131072
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=a58ea0a0-26e5-4855-b558-8fcf94b7ba90 ro nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24716764K/25156724K available (5222K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 439960K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.000000] NR_IRQS:33024 nr_irqs:776 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3074.405 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 6148.81 BogoMIPS (lpj=12297620)
[ 0.000128] pid_max: default: 32768 minimum: 301
[ 0.000184] ACPI: Core revision 20140424
[ 0.005323] ACPI: All ACPI Tables successfully acquired
[ 0.005456] Security Framework initialized
[ 0.005512] AppArmor: AppArmor disabled by boot time parameter
[ 0.005562] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.007532] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.017970] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.022792] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.022879] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.023449] Initializing cgroup subsys memory
[ 0.023501] Initializing cgroup subsys devices
[ 0.023556] Initializing cgroup subsys freezer
[ 0.023606] Initializing cgroup subsys net_cls
[ 0.023658] Initializing cgroup subsys blkio
[ 0.023709] Initializing cgroup subsys perf_event
[ 0.023759] Initializing cgroup subsys net_prio
[ 0.023829] CPU: Physical Processor ID: 0
[ 0.023876] CPU: Processor Core ID: 0
[ 0.023926] mce: CPU supports 9 MCE banks
[ 0.023986] CPU0: Thermal monitoring enabled (TM1)
[ 0.024041] process: using mwait in idle threads
[ 0.024092] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[ 0.024266] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.049090] ftrace: allocating 21683 entries in 85 pages
[ 0.058188] Switched APIC routing to physical flat.
[ 0.058622] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.099404] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (fam: 06, model: 1a, stepping: 05)
[ 0.206384] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.206571] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.206622] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.206675] ... version: 3
[ 0.206722] ... bit width: 48
[ 0.206769] ... generic registers: 4
[ 0.206816] ... value mask: 0000ffffffffffff
[ 0.206865] ... max period: 000000007fffffff
[ 0.206914] ... fixed-purpose events: 3
[ 0.206961] ... event mask: 000000070000000f
[ 0.208460] x86: Booting SMP configuration:
[ 0.208509] .... node #0, CPUs: #1
[ 0.221852] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.222075] #2 #3 #4 #5 #6 #7
[ 0.301601] x86: Booted up 1 node, 8 CPUs
[ 0.301692] smpboot: Total of 8 processors activated (49190.48 BogoMIPS)
[ 0.307533] devtmpfs: initialized
[ 0.312729] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
[ 0.313614] pinctrl core: initialized pinctrl subsystem
[ 0.313729] NET: Registered protocol family 16
[ 0.313872] cpuidle: using governor ladder
[ 0.313920] cpuidle: using governor menu
[ 0.313997] ACPI: bus type PCI registered
[ 0.314044] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.314168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.314238] PCI: not using MMCONFIG
[ 0.314284] PCI: Using configuration type 1 for base access
[ 0.326769] ACPI: Added _OSI(Module Device)
[ 0.326818] ACPI: Added _OSI(Processor Device)
[ 0.326865] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.326914] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.328254] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.341739] ACPI: Dynamic OEM Table Load:
[ 0.341855] ACPI: SSDT 0xFFFF880626068000 00223C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.342442] ACPI: Dynamic OEM Table Load:
[ 0.342546] ACPI: SSDT 0xFFFF8806264F1800 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.343078] ACPI: Interpreter enabled
[ 0.343796] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.343920] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.344048] ACPI: (supports S0 S1 S4 S5)
[ 0.344094] ACPI: Using IOAPIC for interrupt routing
[ 0.344159] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.344688] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.345188] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.350355] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.350409] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.350618] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.350739] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.350809] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.350876] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.350943] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.351257] PCI host bridge to bus 0000:00
[ 0.351305] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.351355] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.351406] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.351457] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.351510] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.351562] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.351614] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.351676] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.351729] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.351801] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.351852] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.351892] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.351977] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.352032] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.352071] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.352158] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.352209] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.352247] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.352335] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.352432] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.352532] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.352626] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.352715] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.352753] pci 0000:00:1a.0: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.352830] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.352914] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.352952] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.353027] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.353111] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.353148] pci 0000:00:1a.2: reg 0x20: [io 0xb800-0xb81f]
[ 0.353223] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.353316] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.353334] pci 0000:00:1a.7: reg 0x10: [mem 0xfbbfe000-0xfbbfe3ff]
[ 0.353416] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.353456] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.353540] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.353604] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.353645] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.353732] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.353799] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.353840] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.353925] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.353962] pci 0000:00:1d.0: reg 0x20: [io 0xb480-0xb49f]
[ 0.354038] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.354122] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.354159] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f]
[ 0.354234] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.355437] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.355474] pci 0000:00:1d.2: reg 0x20: [io 0xb080-0xb09f]
[ 0.355549] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.355642] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.355661] pci 0000:00:1d.7: reg 0x10: [mem 0xfbbfc000-0xfbbfc3ff]
[ 0.355743] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.355783] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.355867] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.355936] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.356021] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.356092] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.356169] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.356223] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.356290] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
[ 0.356358] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
[ 0.356518] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.356535] pci 0000:00:1f.2: reg 0x10: [io 0xb000-0xb007]
[ 0.356541] pci 0000:00:1f.2: reg 0x14: [io 0xac00-0xac03]
[ 0.356548] pci 0000:00:1f.2: reg 0x18: [io 0xa880-0xa887]
[ 0.356554] pci 0000:00:1f.2: reg 0x1c: [io 0xa800-0xa803]
[ 0.356561] pci 0000:00:1f.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.356567] pci 0000:00:1f.2: reg 0x24: [mem 0xfbbfa000-0xfbbfa7ff]
[ 0.356608] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.356675] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.356688] pci 0000:00:1f.3: reg 0x10: [mem 0xfbbf9c00-0xfbbf9cff 64bit]
[ 0.356706] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.356814] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.356914] pci 0000:02:00.0: [1002:68f9] type 00 class 0x030000
[ 0.356927] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.356936] pci 0000:02:00.0: reg 0x18: [mem 0xfbce0000-0xfbcfffff 64bit]
[ 0.356942] pci 0000:02:00.0: reg 0x20: [io 0xc000-0xc0ff]
[ 0.356953] pci 0000:02:00.0: reg 0x30: [mem 0xfbcc0000-0xfbcdffff pref]
[ 0.356984] pci 0000:02:00.0: supports D1 D2
[ 0.357026] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[ 0.357039] pci 0000:02:00.1: reg 0x10: [mem 0xfbcbc000-0xfbcbffff 64bit]
[ 0.357093] pci 0000:02:00.1: supports D1 D2
[ 0.364514] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.364570] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.364575] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.364581] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.364629] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.364728] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.364843] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.364861] pci 0000:06:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.364887] pci 0000:06:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 0.364903] pci 0000:06:00.0: reg 0x20: [mem 0xfaff0000-0xfaffffff 64bit pref]
[ 0.364914] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.364989] pci 0000:06:00.0: supports D1 D2
[ 0.364990] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372518] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.372574] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.372579] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.372585] pci 0000:00:1c.4: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.372658] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.372716] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.372718] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.372719] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.372721] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.372722] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.372723] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.373128] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.373509] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.373677] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.374059] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.374440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.374889] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.375268] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.375716] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.376097] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.376279] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.376330] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.376397] vgaarb: loaded
[ 0.376442] vgaarb: bridge control possible 0000:02:00.0
[ 0.376538] PCI: Using ACPI for IRQ routing
[ 0.382066] PCI: Discovered peer bus ff
[ 0.382113] PCI: root bus ff: using default resources
[ 0.382114] PCI: Probing PCI hardware (bus ff)
[ 0.382138] PCI host bridge to bus 0000:ff
[ 0.382186] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.382237] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.382290] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.382358] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.382362] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.382399] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.382435] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.382469] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.382504] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.382538] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.382572] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.382607] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.382641] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.382675] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.382709] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.382745] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.382779] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.382814] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.382848] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.382883] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.382917] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.382951] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.382984] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.383027] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.383029] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.383032] PCI: pci_cache_line_size set to 64 bytes
[ 0.383090] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.383091] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.383194] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.383249] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.383432] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.386646] Switched to clocksource hpet
[ 0.390966] pnp: PnP ACPI init
[ 0.391023] ACPI: bus type PNP registered
[ 0.391126] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 0.391178] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.391230] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.391283] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.391335] system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
[ 0.391387] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.391440] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.391496] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.391609] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.391710] system 00:03: [io 0x0a00-0x0adf] has been reserved
[ 0.391762] system 00:03: [io 0x0ae0-0x0aef] has been reserved
[ 0.391813] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.391949] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.392000] system 00:04: [io 0x0800-0x087f] could not be reserved
[ 0.392052] system 00:04: [io 0x0500-0x057f] could not be reserved
[ 0.392104] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.392156] system 00:04: [mem 0xfed10000-0xfed103ff] has been reserved
[ 0.392208] system 00:04: [mem 0xfed10400-0xfed107ff] has been reserved
[ 0.392260] system 00:04: [mem 0xfed10800-0xfed10bff] has been reserved
[ 0.392313] system 00:04: [mem 0xfed10c00-0xfed10fff] has been reserved
[ 0.392367] system 00:04: [mem 0xfec8a000-0xfec8a3ff] has been reserved
[ 0.392419] system 00:04: [mem 0xfec8a400-0xfec8a7ff] has been reserved
[ 0.392471] system 00:04: [mem 0xfec8a800-0xfec8abff] has been reserved
[ 0.392523] system 00:04: [mem 0xfec8ac00-0xfec8afff] has been reserved
[ 0.392575] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.392628] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.392680] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.392732] system 00:04: [mem 0xfed40000-0xfed8ffff] could not be reserved
[ 0.392785] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.392888] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.392942] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.392994] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.393054] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.393107] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.393268] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.393322] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.393374] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.393427] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.393480] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.393533] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.393624] pnp: PnP ACPI: found 8 devices
[ 0.393671] ACPI: bus type PNP unregistered
[ 0.399795] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.399798] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.399800] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.399815] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.399870] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.399872] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.399873] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.399877] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.399932] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.399999] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.400052] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.400107] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.400156] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.400209] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.400262] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.400331] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.400387] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.400437] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.400490] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.400543] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.400614] pci 0000:06:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
[ 0.400681] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.400730] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.400784] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.400837] pci 0000:00:1c.4: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.400908] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.400964] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.400965] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.400966] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.400968] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.400969] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.400970] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.400972] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.400973] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.400974] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.400976] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.400977] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.400979] pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.400980] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.400981] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.400982] pci_bus 0000:06: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.400984] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.400985] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.400987] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.400988] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.400989] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.400991] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.400993] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.400994] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.401070] NET: Registered protocol family 2
[ 0.401449] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.402162] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.402552] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.402627] TCP: reno registered
[ 0.402705] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.402938] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.403225] NET: Registered protocol family 1
[ 0.404605] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.404626] PCI: CLS 256 bytes, default 64
[ 0.404667] Unpacking initramfs...
[ 0.657195] Freeing initrd memory: 16864K (ffff880035f00000 - ffff880036f78000)
[ 0.657271] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.657323] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.657729] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
[ 0.657784] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
[ 0.657839] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
[ 0.657895] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
[ 0.657950] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
[ 0.658007] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
[ 0.658061] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
[ 0.658115] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
[ 0.658213] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.658610] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.658747] audit: initializing netlink subsys (disabled)
[ 0.658811] audit: type=2000 audit(1460925026.532:1): initialized
[ 0.659168] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.659235] zbud: loaded
[ 0.659484] VFS: Disk quotas dquot_6.5.2
[ 0.659552] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.660332] msgmni has been set to 32768
[ 0.660630] alg: No test for stdrng (krng)
[ 0.660701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.660815] io scheduler noop registered
[ 0.660864] io scheduler deadline registered
[ 0.660950] io scheduler cfq registered (default)
[ 0.661181] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.661360] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.661507] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.661586] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.661648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.661715] intel_idle: MWAIT substates: 0x1120
[ 0.661724] intel_idle: v0.4 model 0x1A
[ 0.661725] intel_idle: lapic_timer_reliable_states 0x2
[ 0.661999] GHES: HEST is not enabled!
[ 0.662099] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.662528] Linux agpgart interface v0.103
[ 0.662697] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.662750] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.663358] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.663507] mousedev: PS/2 mouse device common for all mice
[ 0.663588] rtc_cmos 00:01: RTC can wake from S4
[ 0.663752] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.663827] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.663908] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.664158] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 0.664209] AMD IOMMUv2 functionality not available on this system
[ 0.664334] TCP: cubic registered
[ 0.664495] NET: Registered protocol family 10
[ 0.664753] mip6: Mobile IPv6
[ 0.664801] NET: Registered protocol family 17
[ 0.664852] mpls_gso: MPLS GSO support
[ 0.665198] registered taskstats version 1
[ 0.665673] rtc_cmos 00:01: setting system clock to 2016-04-17 20:30:26 UTC (1460925026)
[ 0.665783] PM: Hibernation image not present or could not be loaded.
[ 0.666497] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 0.666564] Write protecting the kernel read-only data: 8192k
[ 0.667570] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.668613] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[ 0.677221] systemd-udevd[96]: starting version 215
[ 0.677476] random: systemd-udevd urandom read with 1 bits of entropy available
[ 0.689959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.690023] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.690221] ACPI: bus type USB registered
[ 0.690298] usbcore: registered new interface driver usbfs
[ 0.690317] r8169 0000:06:00.0: irq 42 for MSI/MSI-X
[ 0.690373] usbcore: registered new interface driver hub
[ 0.690557] r8169 0000:06:00.0 eth0: RTL8168c/8111c at 0xffffc90003130000, 6c:62:6d:40:fd:77, XID 1c4000c0 IRQ 42
[ 0.690605] usbcore: registered new device driver usb
[ 0.690698] r8169 0000:06:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 0.691517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.691893] ehci-pci: EHCI PCI platform driver
[ 0.692034] SCSI subsystem initialized
[ 0.692103] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.692160] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.692193] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.692297] ehci-pci 0000:00:1a.7: debug port 1
[ 0.693702] libata version 3.00 loaded.
[ 0.696252] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[ 0.696270] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbbfe000
[ 0.706576] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.706662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.706715] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.706782] usb usb1: Product: EHCI Host Controller
[ 0.706830] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.706883] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.707056] hub 1-0:1.0: USB hub found
[ 0.707107] hub 1-0:1.0: 6 ports detected
[ 0.707399] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.707452] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.707528] ehci-pci 0000:00:1d.7: debug port 1
[ 0.711472] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[ 0.711486] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbbfc000
[ 0.722642] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.722720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.722773] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.722839] usb usb2: Product: EHCI Host Controller
[ 0.722888] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.722939] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.723119] hub 2-0:1.0: USB hub found
[ 0.723174] hub 2-0:1.0: 6 ports detected
[ 0.723459] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.723514] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.723586] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.723658] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 0.723742] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.723795] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.723862] usb usb3: Product: UHCI Host Controller
[ 0.723910] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 0.723961] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.724232] hub 3-0:1.0: USB hub found
[ 0.724285] hub 3-0:1.0: 2 ports detected
[ 0.724487] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.724539] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.724610] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.724702] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.724714] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.724748] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.724749] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724750] usb usb4: Product: UHCI Host Controller
[ 0.724751] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 0.724752] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.724859] hub 4-0:1.0: USB hub found
[ 0.724863] hub 4-0:1.0: 2 ports detected
[ 0.725027] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.725031] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.725036] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.725061] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[ 0.725092] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.725093] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725094] usb usb5: Product: UHCI Host Controller
[ 0.725095] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 0.725095] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.725316] hub 5-0:1.0: USB hub found
[ 0.725319] hub 5-0:1.0: 2 ports detected
[ 0.725471] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.725474] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.725480] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.725496] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.725531] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.725532] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725533] usb usb6: Product: UHCI Host Controller
[ 0.725534] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 0.725534] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.725714] hub 6-0:1.0: USB hub found
[ 0.725718] hub 6-0:1.0: 2 ports detected
[ 0.725871] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.725875] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.725880] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.725896] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.725931] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.725932] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725932] usb usb7: Product: UHCI Host Controller
[ 0.725933] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 0.725934] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.726152] hub 7-0:1.0: USB hub found
[ 0.726156] hub 7-0:1.0: 2 ports detected
[ 0.726309] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.726312] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.726319] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.726337] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 0.726369] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.726370] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.726371] usb usb8: Product: UHCI Host Controller
[ 0.726371] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[ 0.726372] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.726548] hub 8-0:1.0: USB hub found
[ 0.726553] hub 8-0:1.0: 2 ports detected
[ 0.726638] ahci 0000:00:1f.2: version 3.0
[ 0.726772] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.726793] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.726830] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.726832] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.767649] scsi0 : ahci
[ 0.768730] scsi1 : ahci
[ 0.769265] scsi2 : ahci
[ 0.769795] scsi3 : ahci
[ 0.770099] scsi4 : ahci
[ 0.770563] scsi5 : ahci
[ 0.770691] ata1: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa100 irq 43
[ 0.771433] ata2: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa180 irq 43
[ 0.771500] ata3: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa200 irq 43
[ 0.771566] ata4: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa280 irq 43
[ 0.771633] ata5: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa300 irq 43
[ 0.771699] ata6: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa380 irq 43
[ 1.090619] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.092369] ata1.00: ATA-8: WDC WD7500AALX-009BA0, 15.01H15, max UDMA/133
[ 1.092429] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.094367] ata1.00: configured for UDMA/133
[ 1.094714] scsi 0:0:0:0: Direct-Access ATA WDC WD7500AALX-0 1H15 PQ: 0 ANSI: 5
[ 1.414537] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.416886] ata2.00: ATA-8: WDC WD7500AALX-009BA0, 15.01H15, max UDMA/133
[ 1.416946] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.418801] ata2.00: configured for UDMA/133
[ 1.419118] scsi 1:0:0:0: Direct-Access ATA WDC WD7500AALX-0 1H15 PQ: 0 ANSI: 5
[ 1.654447] tsc: Refined TSC clocksource calibration: 3074.293 MHz
[ 1.738454] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.058390] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.378290] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.654591] Switched to clocksource tsc
[ 2.698222] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.731299] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.731329] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.731373] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.731374] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.731391] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.731592] sd 0:0:0:0: [sda] Write Protect is off
[ 2.731641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.731651] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.750742] sda: sda1 sda2 sda3
[ 2.751115] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.751475] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.751564] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.752010] sdb: sdb1 sdb2 sdb3
[ 2.752257] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.923220] md: md0 stopped.
[ 2.923901] md: bind<sdb1>
[ 2.924087] md: bind<sda1>
[ 2.926500] md: raid1 personality registered for level 1
[ 2.927293] md/raid1:md0: active with 2 out of 2 mirrors
[ 2.927360] md0: detected capacity change from 0 to 12876513280
[ 2.934285] md0: unknown partition table
[ 2.968599] md: md1 stopped.
[ 2.969422] md: bind<sdb2>
[ 2.969704] md: bind<sda2>
[ 2.970969] md/raid1:md1: not clean -- starting background reconstruction
[ 2.971029] md/raid1:md1: active with 2 out of 2 mirrors
[ 2.971098] md1: detected capacity change from 0 to 536281088
[ 2.971819] md1: unknown partition table
[ 2.989763] md: md2 stopped.
[ 2.990794] md: bind<sdb3>
[ 2.990972] md: bind<sda3>
[ 2.992293] md/raid1:md2: not clean -- starting background reconstruction
[ 2.992352] md/raid1:md2: active with 2 out of 2 mirrors
[ 2.992552] created bitmap (6 pages) for device md2
[ 2.993150] md2: bitmap initialized from disk: read 1 pages, set 10892 of 10977 bits
[ 3.005486] md2: detected capacity change from 0 to 736596131840
[ 3.030572] md2: unknown partition table
[ 3.068658] device-mapper: uevent: version 1.0.3
[ 3.069133] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 3.142007] raid6: sse2x1 7580 MB/s
[ 3.209991] raid6: sse2x2 8928 MB/s
[ 3.277974] raid6: sse2x4 9960 MB/s
[ 3.278021] raid6: using algorithm sse2x4 (9960 MB/s)
[ 3.278069] raid6: using ssse3x2 recovery algorithm
[ 3.280434] xor: measuring software checksum speed
[ 3.317957] prefetch64-sse: 12662.000 MB/sec
[ 3.357946] generic_sse: 11176.000 MB/sec
[ 3.357994] xor: using function: prefetch64-sse (12662.000 MB/sec)
[ 3.365967] Btrfs loaded
[ 3.661757] md: resync of RAID array md2
[ 3.661812] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 3.661873] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 3.661950] md: using 128k window, over a total of 719332160k.
[ 3.771634] random: nonblocking pool is initialized
[ 3.812446] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.324513] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.324738] systemd[1]: Detected architecture 'x86-64'.
[ 4.431900] systemd[1]: Inserted module 'autofs4'
[ 4.440611] systemd[1]: Set hostname to <Debian-84-jessie-64-minimal>.
[ 4.440867] systemd[1]: Initializing machine ID from random generator.
[ 4.440954] systemd[1]: Installed transient /etc/machine-id file.
[ 4.751583] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.751891] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.751999] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.752073] systemd[1]: Starting Remote File Systems (Pre).
[ 4.752356] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.752424] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.752759] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.752841] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.752929] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.753002] systemd[1]: Starting Paths.
[ 4.753257] systemd[1]: Reached target Paths.
[ 4.753311] systemd[1]: Expecting device dev-md-0.device...
[ 4.753513] systemd[1]: Expecting device dev-md-1.device...
[ 4.753776] systemd[1]: Starting Root Slice.
[ 4.754044] systemd[1]: Created slice Root Slice.
[ 4.754099] systemd[1]: Starting User and Session Slice.
[ 4.754417] systemd[1]: Created slice User and Session Slice.
[ 4.754475] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.754749] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.754805] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.755088] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.755146] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.755423] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.755480] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.755755] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.755812] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.784737] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.784799] systemd[1]: Starting udev Control Socket.
[ 4.785072] systemd[1]: Listening on udev Control Socket.
[ 4.785130] systemd[1]: Starting udev Kernel Socket.
[ 4.785397] systemd[1]: Listening on udev Kernel Socket.
[ 4.785454] systemd[1]: Starting Journal Socket.
[ 4.785734] systemd[1]: Listening on Journal Socket.
[ 4.785795] systemd[1]: Starting System Slice.
[ 4.786110] systemd[1]: Created slice System Slice.
[ 4.786169] systemd[1]: Starting system-getty.slice.
[ 4.786485] systemd[1]: Created slice system-getty.slice.
[ 4.787223] systemd[1]: Starting Increase datagram queue length...
[ 4.793896] systemd[1]: Starting Load Kernel Modules...
[ 4.794407] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.794918] systemd[1]: Mounting Huge Pages File System...
[ 4.795371] systemd[1]: Starting udev Coldplug all Devices...
[ 4.795873] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.936085] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.936209] systemd[1]: Mounting Debug File System...
[ 4.936663] systemd[1]: Starting Slices.
[ 4.936922] systemd[1]: Reached target Slices.
[ 4.937700] systemd[1]: Started Load Kernel Modules.
[ 4.938084] systemd[1]: Starting Apply Kernel Variables...
[ 4.938563] systemd[1]: Mounted FUSE Control File System.
[ 4.938660] systemd[1]: Mounted Configuration File System.
[ 5.033260] systemd[1]: Started Apply Kernel Variables.
[ 5.112476] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.113092] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.117298] systemd[1]: Started udev Coldplug all Devices.
[ 5.117875] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 5.148543] systemd[1]: Mounted Debug File System.
[ 5.148830] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.149128] systemd[1]: Mounted Huge Pages File System.
[ 5.149691] systemd[1]: Started Increase datagram queue length.
[ 5.153415] systemd[1]: Starting Syslog Socket.
[ 5.153742] systemd[1]: Listening on Syslog Socket.
[ 5.153800] systemd[1]: Starting Journal Service...
[ 5.154543] systemd[1]: Started Journal Service.
[ 5.373574] systemd-udevd[253]: starting version 215
[ 5.977529] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20140424/utaddress-254)
[ 5.977681] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.977769] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.089648] EDAC MC: Ver: 3.0.0
[ 6.093820] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 6.093925] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 6.094001] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 6.095682] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.098350] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 6.098421] ACPI: Power Button [PWRB]
[ 6.098502] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.098569] ACPI: Power Button [PWRF]
[ 6.141068] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.189504] wmi: Mapper loaded
[ 6.699946] iTCO_vendor_support: vendor-support=0
[ 6.706987] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.707063] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.707182] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.874459] [drm] Initialized drm 1.1.0 20060810
[ 6.960163] [drm] VGACON disable radeon kernel modesetting.
[ 6.960217] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[ 7.090527] Adding 12574716k swap on /dev/md0. Priority:-1 extents:1 across:12574716k FS
[ 7.195534] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 7.195624] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[ 7.200418] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 7.240056] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card0/input3
[ 7.321405] EXT4-fs (md2): re-mounted. Opts: (null)
[ 7.437098] EXT4-fs (md1): mounting ext3 file system using the ext4 subsystem
[ 7.501379] md: delaying resync of md1 until md2 has finished (they share one or more physical units)
[ 7.565402] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.876056] systemd-journald[250]: Received request to flush runtime journal from PID 1
[ 8.410112] r8169 0000:06:00.0 eth0: link down
[ 8.410128] r8169 0000:06:00.0 eth0: link down
[ 8.410268] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.411021] r8169 0000:06:00.0 eth0: link up
[ 11.411085] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[14203.812039] md: md2: resync done.
[14203.842189] md: resync of RAID array md1
[14203.842202] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[14203.842216] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[14203.842239] md: using 128k window, over a total of 523712k.
[14203.958291] RAID1 conf printout:
[14203.958294] --- wd:2 rd:2
[14203.958298] disk 0, wo:0, o:1, dev:sda3
[14203.958300] disk 1, wo:0, o:1, dev:sdb3
[14209.877420] md: md1: resync done.
[14209.909819] RAID1 conf printout:
[14209.909822] --- wd:2 rd:2
[14209.909826] disk 0, wo:0, o:1, dev:sda2
[14209.909828] disk 1, wo:0, o:1, dev:sdb2
[21332.943216] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[56240.487886] perf interrupt took too long (5101 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[58024.580519] perf interrupt took too long (10104 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
[65270.700914] do_IRQ: 2.42 No irq handler for vector (irq -1)
[66166.579564] do_IRQ: 0.124 No irq handler for vector (irq -1)
das erstmal das andere muss ich mich mal schlau machen
Dieser Beitrag wurde zuletzt bearbeitet: 18.04.2016 16:20 von MonsterHosting.
|
|
